Horner-apg SmartBlock HE-579ACM300 Manual do Utilizador descarregar pdf (Página 2)

PAGE 2 12 May 2011 MAN0951-02

HE-559ACM300

Information is subject to change without notice.

2 DIMENSIONS AND INSTALLATION

Network, Power and Grounding:

A single 5 pin connector is used to make both a network connection and power input. A quality class 2

power supply should be used for this product. If the power is run with the network cable, care must be

taken such that the voltage does not drop below the lower supply limit on longer runs.

A quality protective earth ground is required for safe and proper operation. The best protective earth

ground is achieved by screwing the lower left grounding location into a grounded back plate. Alternately

a protective earth ground can be connected to the spade lug.

Please see Horner manual MAN0799 for details on CAN wiring.

CAN Network & Power Port Pin Assignments

Signal

Signal Description

Direction

V-

CAN and Device

Ground - Black

CN_L

CAN Data Low - Blue

In/Out

SHLD

Shield Ground - None

CN_H

CAN Data High - White

In/Out

V+

Positive DC Voltage

Input (10-30VDC) - Red

4.56”

(115.8mm)

4.48”

(113.7mm)

2.16”

(54.8mm)

With connector

2.84”

(72.1mm)

CAN Network & Power

Connector

Torque rating 4.5 – 7 Lb-In

(0.50 – 0.78 N-m)

CTs and Relay

Voltage Inputs

Can and

Power

Connector

Network ID

Selector

Switches

Status LEDs

Earth Ground

Location

1 2 3 4 5 6 7

Comentários a estes Manuais

Sem comentários

Horner-apg SmartBlock HE-579ACM300 Manual do Utilizador Página 2

Comentários a estes Manuais

Manuais e produtos relacionados com Hardware Horner-apg SmartBlock HE-579ACM300