Horner-apg XLt OCS Manual do Utilizador descarregar pdf (Página 54)

CH. 11 MAN0878-04-EN

August 12, 2009 Page 54 of 100 ECN # 979

View Status

The View Status Sub-Menu displays up to 17 System Settings. The Lcl Net Use % and All Net Use %

System Settings only appear for XLe/XLt models that have CAN ports (XE1xx). Only the Mode System

Setting is editable.

Model: XExyyz = 5 or 6 character Model number of this XLe/XLt unit

x is 1 for models that have a CAN port; 0 = no CAN port

yy indicates the installed I/O module; 00 = no I/O module

z indicates the installed COM module; N = no COM module

Mode: Idle = XLe/XLt is in Idle mode

DoIo = XLe/XLt is in Do I/O mode

Run = XLe/XLt is in Run mode

Scan Rate(mS): 0.0 = XLe/XLt is not in Run mode

0.1 to 999.9 = Average number of mS for each ladder scan

Lcl Net Use %: 0.0 to 100.0 = CAN network bandwidth % used by this XLe/XLt node

All Net Use %: 0.0 to 100.0 = CAN network bandwidth % used by all nodes

Ladder Size: x = Number of bytes in application ladder program

Config Size: x = Number of bytes in application I/O configuration

Graphics Sz: x = Number of bytes in application graphic screens

String Size: x = Number of bytes in application string table

Bitmap Size: x = Number of bytes in application bitmaps

Text Size: x = Number of bytes in application text tables

Font Size: x = Number of bytes in application font tables

Protocol Sz: x = Number of bytes in application downloaded protocols

SMS Msg Sz: x = Number of bytes in application SMS protocol configuration

Firmware Rev: xx.yy = Current firmware version

CPLD Rev: x.y = Current CPLD (Complex Programmable Logic Device) version

Self-Test: Ok = All power-on self-tests passed

Fault = One or more power-on self-tests failed

View Diags

The View Diags Sub-Menu displays up to 14 System Diagnostics, all of which are not

editable. The Net

Errors, Network State, Network ID and Dup Net ID System Diagnostics only appear for XLe/XLt models

that have CAN ports (XE1xx).

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 99 100

Sem comentários

Horner-apg XLt OCS Manual do Utilizador Página 54