Horner-apg XL7 OCS Manual do Utilizador descarregar pdf (Página 39)

XL7 User Manual

Figure 10.2 – XL7 I/O Cover Removed (sample I/O board)

Once the back is removed the jumper selection can be changed. The jumper settings are documented

on each data sheet using a diagram such as Figure 9.4 below and a description of the jumper settings.

Figure 10.3 – Example Jumper Diagram

To re-install the cover, place the I/O cover back on the unit.

Place the screw back into the hole and turn the screw slowly counter clockwise until it clicks into the

threads. This prevents the screw from being cross-threaded. Now turn the screw clock-wise until the

cover is firmly secured. Repeat this process for all four (4) screws.

Ensure not to exceed the recommended

max torque of 7-10 lb-in. [0.8 – 1.13 Nm.]

J1 J2

JP3

JP1

001XLE005-R1

Page 39 of 110

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 109 110

Sem comentários

Horner-apg XL7 OCS Manual do Utilizador Página 39